Digital Multimeter Professional (Replaces TBM811)
This meter is the mainstay of the CABAC range of multimeters and is designed for use in heavy industry such as mining. Robust, dustproof and splash-proof, this meters has all the basic features a professional tradesman will require from a DMM. If you are looking for a reliable meter that will give many years of service then consider this excellent, rugged meter.

Features:
• Dual Display
• 1000V Protection
• 9 9/10 Digital 10000 Count
• Data Hold/Diode Tester
• Beep-Jack™ Input Warning
• Current Range Fused (600V HBC Fused)
• Bargraph
• USB Interface (optional)

Compliance and Safety:
IEC61010-1 2nd Edition (2001) CAT IV 1000V.
Transient protection 8kV.
Overload protection
V = 1050Vrms; mA = 0.63A/500V
HRC Fuse; A = 12.5A/550V HRC
Fuse; Others ranges 600Vrms
Meets EN61326 (1997, 1998/A1), EN61000-4-2 (1995), EN61000-4-3 (1996).

Ranges

AC/DC Voltage
Range: 60m/600m/9.999/99.99/999.9 V
Accuracy: ±1% +4d

AC/DC Current
Range: 600μ/6000μ/60m/600m/6/10 A
Accuracy: ± 0.8% +4d

Resistance
Range: 600/6K/60K/600K/6M/60M
Accuracy: 0.5% +4d

Capacitance:
Range: 60n/600n/6μ/60μ/600μ/6m/25m F
Accuracy: ± 2% +3d

Logic level Frequency:
Range: 15Hz to 1kHz
Accuracy: ± 0.04% + 4d

Line level Frequency:
Range: 5Hz to 1MHz
Accuracy: 0.004% + 4d

Each unit comes in a gift box with leads, operating manual, batteries installed and protective holster.
Battery: Standard 1 x 9V 6F22
Size: L186 x W87 x H35.5mm or L198 x W97 x H55mm with holster
Weight: 340g (430g with holster)

Optional Accessories:
TBR85X - RS 232 Optical Cable with Special Software (for PC running XP).
USB2SER - USB to Serial Adaptor.
AL04 - Replacement test lead